• SEARCH
 
Australia   New Zealand  
View Products
Home  >  Products  >  Liquid Cooling System  >  P500 Pump
 
Newsletter Sign-Up
To become a subscriber to our newsletter and recieve all the latest news and information please enter your email.
Email



P500 Pump - CL-W0132 Back to previous page
Overview Features Specifications Gallery Awards & Reviews Email a Friend FAQ
Overview
Superior 12 Volts DC convenience: Plugs into the computer power supply
Compatible with high flow systems utilising ID 6.4mm(1/4”) and 9.5mm(3/8”) tubing.
DC 12V pump with 500L/h flow rate to dissipate the thermal quickly and smoothly
The pedestal can be secured onto the case with screws
The ceramic bearings significantly extend the life-expectancy of the pump
80,000 hours MTBF (Mean Time Between Failure)
Features
ID 6.4 mm(1/4”) quick install connectors
x 2
ID 9.5 mm(3/8”) quick install connectors
x 2
Screws and nuts for fastening the pump onto chassis
Velcro tape to attach the pump to places without screw holes
 
Application :Install the Thermaltake’s P500 pump? CPU waterblock?
 
12 cm radiator?liquid tank and tube to set up the liquid cooling system
 
Specifications
Rated voltage
DC 12V
Input current
600 mA
Bearing
Ceramic bearing
Flow rate
500L/h
Connector
4pin
Noise
16dB
Fan Life time
80,000 hours (MTPF)
Warranty
2 year
Gallery
Angle view
Front view
Side view
Awards & Reviews
FAQ

How do I connect the extra refill reservoir tank to the water pump?
Please connect two hoses from both the outlets of the reservoir to the uppermost two tubes of the water pump.
   

How do I know if the pump is working?
Please feel the pump to see if it is vibrating at all. If it is not, please replace it with us.
   

It appears as if something is blocking my pump from pumping out water smoothly. What should I do?
1. Please turn on the pump without turning on the computer system for testing.
2. In order to turn on the pump without turning on the system, please follow the following steps:
a. Unplug all connections from the power supply to system components.
b. Connect only the pump to the power supply.
c. Make sure the power supply is in the 'Off' position.
d. Take a paper clip and untwist it.
e. Plug one side of the paper clip wire into the green wire hole on the 20 or 24pin connector from the power supply.
f. Plug the other side of the paper clip wire into any of the black wire hole on the same connector.
g. Turn on the power supply.
3. If the water is flowing properly through the liquid cooling system without any signs of blockage, please turn off the power supply and connect all power cables to their proper location in the computer system.
PLEASE ONLY TURN ON THE COMPUTER SYSTEM IF THE BIGWATER SE IS FLOWING PROPERLY.
4. If the water is showing signs of blockage and the water is not flowing properly, please turn off the power supply, wait for 5-10 seconds, and turn on the power supply again. Repeat this process as needed until the liquid in the system flows properly without any major air bubbles inside the tubes.
5. If there are mini air bubbles within the tubes while operating, please tap the tubes lightly to get the air bubbles out of the system.


 
Also in this section: 
Accessory  |  Chassis  |  Cooler  |  Liquid Cooling System  |  Power Supply
 
© 2007 Thermaltake Technology Co., Ltd. All Rights Reserved.  |  
Managed with Pegboard CMS | Website by  Website by AccsysIT